V50-3+NPE+FS-280
|
Technical data
SPD to EN 61643-11 | Type 1+2 |
SPD to IEC 61643-11 | Class I+II |
SPD to UL 1449 | Type 4 |
Nominal voltage AC (50 / 60 Hz) (V) | 230 |
Maximum continuous voltage AC (V) | 280 |
Nominal discharge current (8/20 µs) (kA) | 30 |
Maximum discharge current (8/20 μs) (kA) | 50 |
Lightning surge current (10/350 μs) (kA) | 12.5 |
Total discharge current (10/350) (kA) | 50 |
Arrestor surge current (8/20 µs) [total] (kA) | 80 |
Protection level [L-N] (kV) | 1.3 |
Residual voltage [L-N] @ 1 kA (kV) | 0,7 |
Residual voltage [L-N] @ 5 kA (kV) | 0,8 |
Max. mains-side overcurrent protection | 160 A gL/gG |
Short-circuit withstand for max. mains-side overcurrent protection | 50 kA eff |
Operating temperature range (°C) | -40 - +80 |
Protection rating | IP20 |
Approvals | UL |
Cable cross-section, flexible (fine-wire) (mm²) | 1.5 - 35 |
Rigid cable cross-section (single wire/multiwire) (mm²) | 1.5 - 35 |
Cable cross-section, flexible (fine-wire) (AWG) | 16 - 2 |
Rigid cable cross-section (single wire/multiwire) (AWG) | 16 - 2 |
Pole version | 3+N/PE |
Tender text
CombiController V50Lightning current combination arrestor, type 2
• For the equipotential bonding of lightning current to VDE 0185-305 (IEC 62305)
• Lightning current discharge capacity of 12.5 kA (10/350) per pole and up to 50 kA (10/350) in total
• Modular, plug-in arrestor with dynamic cut-off unit and visual status display
• Locking mechanism with vibration protection and voltage keying
• Halogen-free plastic (UL 94 V-0)
• The remote signalling (FS) variants have a potential-free changeover contact for remote signalling
Application: Lightning current equipotential bonding for buildings of class III and IV.
Fabrikat: OBO BETTERMANN
Type: V50-3+NPE+FS-280
Item No.: 5093533
Einheit: